Water based Hybrid primer ideal before applying ISOLOR Hybrid Aqua Plus elastomericwaterproofing coating. Low odor and VOC. Ready for use.Suitable for the priming of new cement substrates as also of existing waterproofing coatings.Can be applied above bituminous materials, mosaic, aluminium foils etc.Excellent adhesion and penetration. Quick drying.TECHNICAL CHARACTERISTICSSpecific gravity: 0,99 -1,03g/lCovering power: 4-8m2/lt per coat depending on the substrate.Dilution: Ready for use.Drying: Touch dry after ½–1 hour.VOC class: “Binding primers”. Type WB. VOC limit=30gr/lt. Max VOC of product ready for use=5gr/lt.Recoatability: Recoatable after 2-3 hours. These times prolong under cold and wet conditions.Color shades: Milky-transparentAPPLICATION EQUIPMENT: Brush, roller and airless spray.SURFACE PREPARATIONClean the surface from oil, cropped paints, dust, dampness and moulds.APPLICATIONStir well before use. Apply uniformly. Recoatable with ISOLOR Hybrid or water based proofingcoatings.CLEANING EQUIPMENTKeep the tools wet during application. Strain well your tools from paint back to the pot andclean immediately with water and soap.APPLICATION CONDITIONSTemperature 8-30°C and relative humidity lower than 80%. Contrary weather conditions maydegrade product’s quality. New concretes or masonry should be dried for a period of 3-4 weeksbefore priming. Don't prime high humid substrates before drying.STORAGE CONDITIONSClose well after use. Store in a cool place. Protect from freezing and sun exposure.PRECAUTIONARY STATEMENTKeep out of reach of children.